United Industries

United Industries has manufactured quality ASTM A270 stainless steel tubing for 25+ years, servicing the sanitary, dairy, food, beverage and pharmaceutical industries. United Industries' bio-pharmaceutical customers constantly request cleanliness, identification, process control and documentation. To meet these ever increasing demands United has consistently invested in technology, processes and people to ensure these stringent requirements

With the widest selection of sizes, United Industries can manufacture tubing to the exact dimension for your every need.

United Industries offers a variety of finishes tailored to your requirements.


 Laser welds are superior to TIG welds in the following ways:

• Less potential for corrosion in weld area

The narrower heat-affected zone of the laser weld reduces the corrosion potential along the weld. The exact power concentration of the laser minimizes grain growth and reduces Cr and Ni depletion near the weld. This results in a stronger weld.

• Full finished tube appearance

Welds are cold worked and annealed to result in a full finished tube that has a straighter weld and finer grain structure. Tubes are finished to the highest standards of ASME BPE, with welds that consistently exhibit grain recrystalization close to the characteristics of the parent metal.

• Superior performance

The narrow weld bead produced by a high-powered laser source has greater strength and ductility, thus outperforming a TIG weld. The S7 ASTM test shows that laser-welded tubes consistently demonstrate less corrosion potential.


For sanitary applications, like pharmaceutical and food processing, it is critical that the weld area not have the potential to entrap contaminants. The narrow, deeply penetrated weld found in laser welding minimizes the chance for contamination.

United Industries has invested in the best technology available to offer 1/2" – 6” stainless steel tubing for pharmaceutical and food processing applications that outperform TIG welding and other laser welds. We offer a broad range of products in a variety of stainless steels. We adhere to the highest industry standards:

• Fully compliant with 3A, BPE, ASME, and ASTM, or applicable customer specifications

• Adheres to ISO 9001:2000, ISO/TS16949:2002 Registered Quality Management System (RQMS) standards



United Industries performs all required ASTM A270/A1016 testing. In addition, we also perform flare, flatten, flange, and reverse bend tests. Surface roughness is measured per ASME/ANSI B46.1 requirements. These measurements are derived from four (4) readings taken at cross sections approximately 90 degrees apart.



Pharmaceutical A270-S2 ASME BPE:

SF1 (Mechanical Polish) 20Ra max. (0.5μm) ID, 32Ra max. (0.8μm) OD

SF4 (Electro Polish) 15Ra max. (0.4μm), 32Ra max. (0.8μm) OD



Sanitary A270 (3A) TPV Certified: Bright Annealed, ID-only, OD-only, ID & OD.

Mechanical Polish = 32 Ra OD, 20 Ra ID.

All mechanical polished tubes meet or exceed A270, 3A, A270-S2, ASME BPE.